Ultra Compact Next Generation Marine Diesel Generators
UCM1 – 3.5KW
Features
cupro nickel Heat exchanger
Self Priming Impeller pump
Stainless steel water cooled Exhaust Mixer
Air Cleaner / Intake Silencer
Oil pressure & Water Safety Shutdowns
Extra Wide Timing Drive System
12 volt Electric fuel pump
Front and side service panels
Belt Guards
Remote Start Panel with Hour Meter & Harness
Mid Speed Operation (Provides low sound & vibrations)
Specs
With Sound case L-30″ W -18″ H- 16.5″
Horizontal , Water cooled 4 cycle Diesel Engine
1 cylinder
1800 Rpm
Weight 200 lbs
Fuel Injected
output Voltage 120/240
output AMPS 30/15
Output Watts 3500
Fuel consumption 2/10 GPH
exhaust 1 1/2″
Raw Water intake 5/8″
Fuel intake line 5/16″
Fuel Return line 1/4
UCM2 – 5.5KW
Features
- Cupro-Nickel Heat Exchanger
Water cooled Exhaust Manifold
Direct Driven Self Priming sea water pump
Stainless Steel water cooled exhaust System
Air cleaner / Intake Silencer
Oil Pressure & Water Temp Safety shutdowns
Helical Offset tooth Timing Drive system
120/240 volt
12 volt Electric fuel pump
Remote start panel & harness
Hour Meter
mid speed operation ( low sound & vibration)
Specs
With Sound case L-30″ W -18″ H- 16.5″
Horizontal , Water cooled 4 cycle Diesel Engine
1 cylinder
1800 Rpm
Weight 200 lbs
Fuel Injected
output Voltage 120/240
output AMPS 30/15
Output Watts 3500
Fuel consumption 2/10 GPH
exhaust 1 1/2″
Raw Water intake 5/8″
Fuel intake line 5/16″
Fuel Return line 1/4
Optional Equipment
- Sound enclosure
Sifon loop ready $150.00
20 – 30′ Harness extentions $125.00
Charging system (5.5 kw only) $425.00
Full Instrumentation Panel ( 5.5 kw only ) $355.00
Pricing
UCM1_3.5 kw Without enclosure………………$5,545
UCM1_3.5 kw With sound enclosure…………………………………$6,650
UCM2 5.5 kw Without enclosure…………….$6,590
UCM2 5.5 kw With sound enclosure……………………………….$7,585
Shipping Costs ( Continental USA only) Price varies – Approx. $200.00
LOCAL INSTALLATIONS…..Each project is handled case by case, due to many variables. A Rough idea of installation cost is: Cost of gen + shipping , Parts mock up is around $800/$1000 depending on choices made , Our labor is determined by boat location, level of difficulty but is usually around $1200-$1500. plus Sales Tax if Applicable.